Water treatment at its best!

Whole house reverse osmosis solutions for high sodium, high TDS, colored and brackish waters. Unlike, most multi - piece water treatment systems that are scattered throughout your home and well house our skid mount unit contains all, reverse osmosis, pressure pump if required, re - pressure system, UV or Ozonation on the base frame. And most important our WH - RO Series reverse osmosis systems are user friendly and easy to install.

Create the ultimate water supply throughout your entire home with our Salt Free WH - RO whole house reverse osmosis system. Each WH - RO whole house reverse osmosis system includes: Complete pre-treatment if required for the removal of iron, manganese, hydrogen sulfide gas, suspended solids, and hard water. See our standard features listed below.  All components - (excluding storage tank and pre / post conditioning) are contained on our skid mount aluminum platform

Enjoy the benefits of great tasting water at every tap and enjoy the feel of "soft water" without the use salt or any other chemicals. Our Whole House Reverse Osmosis Systems are among the most water efficient systems in the industry. With the use of concentrate water recirculation our systems can recover up to 75% of the feed water – even our standard systems reviver in the area of 50% as household product water. Most other systems only recover 30% and less of the feed water.

Once the WH - RO is installed and feed water is made available to it, the Storage Tank will begin to fill with product water. The product water will continue to fill the Storage Tank until the tank float switch closes and shuts the entire system off. At the same time, while the tank is filling, concentrate water will begin to flow into the household's drain system. The concentrate water will continue to flow to the drain system until the tank float switch closes and shuts the entire system off. When there is a demand for water in the house, the Repressurization System is automatically activated and draws product water from the Storage Tank. The product water is then delivered at the required flow rate to the home. If enough product water is used to the point where the float switch is reopened, the WH - RO System is automatically reactivated and begins to replace the product water that has been depleted.

Why Water Conditioners from Vortex Envirotechnologies Water Conditioners from Vortex Envirotechnologies?

Our whole house reverse osmosis systems are designed for the customer who wants a state of the art, user friendly, low maintenance multi  - filtration system to purify and to provide great tasting drinking water for his/her family. Reverse Osmosis is the same process that major water, beverage bottling, and pharmaceutical companies use. These systems are designed to filter brackish water, high levels of sodium and total dissolved solids (TDS), iron, manganese, and more. If your well has salt water intrusion problems and high TDS, this is the only solution. Unlike, most multi - piece water treatment systems that are scattered throughout your home and well house our skid mount unit contains all, reverse osmosis, pumps, UV or ozone on a base frame. And most important our WH - RO Series reverse osmosis systems are user friendly, easy to install. And maintain

WH - RO Skid Mount Series Include an Ozone Treatment Circulating System of the Stored Water

The system uses an Ozone Generator in combination with a circulation pump to continuously aerate your water storage tank with Ozone Saturated Bubbles that oxidize and kill many of the impurities in your water. These bubbles also provide the pumping action to constantly circulate the entire contents of your holding tank at the rate of approx 5GPM (over 7,200 gallons per day). The water produced is refreshing and delicious. You will have high quality water throughout your home and land for all your water needs: Showering, Laundering, Dish Washing, Cooking, Plant watering, etc. All of this and the system costs only pennies a day to operate. (Typically about $20 - $35 per month).


Ozone (O3), one of nature’s basic elements, is a very powerful disinfecting and deodorizing gas consisting of oxygen (O2) with an extra oxygen atom attached, therefore becoming ozone (O3). When oxygen in the air is exposed to high intensity ultraviolet rays, ozone is created (such as our sun creating the ozone layer). When ozone does its job, it oxidizes by giving up and attaching its extra oxygen atom to anything that can be oxidized. Once this process occurs, the ozone molecule again becomes oxygen (O3 - O = O2).

Thus, the only by - product of ozone is pure oxygen. In fact, ozone reverts to pure oxygen quite rapidly and naturally: The half life of ozone in air is on the order of hours and on the order of minutes when dissolved in water. Additionally, ozone dissolves over 12 times more readily into water than pure oxygen, and then reverts back to oxygen, providing hundreds of times more dissolved oxygen in your water than could otherwise be possible. This high oxygen content of your water provides many of the same benefits made possible with the system.


Municipal water companies have used ozone technology to treat large quantities of water for many years because of its effectiveness in purifying and conditioning water – furthermore, it is the standard in Europe – no such thing as chlorine is ever used.

We have selected Ozone Technology for use in treating well and tank water because of its unique properties.

1. Kills all coliform bacteria on contact, thousands of times faster than chlorine or

2. Neutralizes PH.

3. Kills fungus, mold and yeast spores.

4. Precipitates all heavy metals

5. Removes excess iron, manganese, and sulfur by a process known as micro - flocculation, thus conditioning the water naturally without chemical additives.

6. Removes color and odor, leaving pure, healthy water.

7. Reduces scale build-up on equipment such as pipes and water heaters, and staining of showers, sinks, Bathtubs and toilets.

8. Ozone leaves no residue; its only by-product is pure oxygen.


WH-RO Series Standard Features

(Appearances will vary)

Our state of the art whole house reverse osmosis systems includes:

  • All components (excluding storage tank  and pre / post conditioning) located and contained on our aluminum frame
  • Approx. System dimensions: 25"W x 48"L x 61" high (500gpd -1,800gpd) Designed to fit through most standard door ways.
  • Includes the chemical and salt free reverse osmosis pre-treatment system if required. The chemical free system provides protection for the RO membrane against hard water, iron, manganese, hydrogen sulfide gas, suspended solids, chlorine and more.
  • Treated water from our WH-RO Series is guaranteed to meet or do better than the EPA Secondary Drinking Water Standards of 500ppm or less t.d.s.
  • Includes rotary vein pump if required for temperature or T.D.S. with pressure gauge
  • Includes T.D.S. monitor
  • Includes Permeate and Reject flow meters
  • Includes 1-  10’’ or 20" BB sediment prefilter to remove dirt and sediment
  • Includes 1-  10’’ or 20" BB carbon pre/post filter if required
  • Includes a Thin Film Composite Membrane. Rejection rate (98% +). With High feed water recovery rate (50% +).
  • Includes Liquid Filled Pressure Gauge. - Measures system's operating pressure.
  • Includes Prefilter Gauge. Measures pressure drop and indicates filter change required.
  • Includes 1- 35" dia. x 81" ht. 300 gallon storage tank. For ease of handling and ability to get through doors we use a multiple array of tanks for larger households.
  • Includes 2 float switches for storage tank - Top of tank for shut - off, one at bottom of tank for control of re - press. pump.
  • Includes 12gpm @ 50psi fully automatic electric pump (constant pressure) re - pressure system - Draws water out of the storage tank.
  • Includes a chemical free ozonation recirculation system.
  • Includes our built in pH neutralizer system. Designed to keep your house water non - aggressive.
  • Each skid mount reverse osmosis is fully assembled and wet tested before it leaves the plant.
  • For optimum WH - RO performance customers must have at least 5gpm @ 30psi available. Note: Our WH - RO Series contains complete pretreatment for chlorine and hard water (calcium) typically associated with municipal water sources if required. If WH - RO is to be used on well water we offer the following guidelines: Operating Parameters: Max TDS – 3,500ppm, Total iron is less than 5ppm, Manganese is less than 3ppm, H2S less than 10ppm, Water hardness below 30gpg, pH 6.5 -8.5, No iron bacteria. Calculations of production capabilities are based on a feed water temperature of 50 Deg. F. Lower temperatures may result in slightly lower production levels.
  • We tailor our WH - RO systems to your needs and to the aquifer where you live. To ensure the longest trouble free life and best possible treated water quality, we require that you to fax or     e-mail your water chemistry report and let us know the name of your municipal water district provider.
  • OVERSEAS SHIPPING is AVAILABLE – crating and shipping charges are extra please call for quotation

Not all whole house reverse osmosis systems are created equal!

We offer top of the line state of the art reverse osmosis systems for your home, factory, business, and farm. See what sets our reverse osmosis filters apart from all others and why companies and home owners from all over the Globe have chosen us for their water treatment needs.

See and compare our unmatched WH - RO Reverse Osmosis selection below - standard features (listed above) include skid, storage tank, pre/post treatment if required, recirculating ozonation systems, and pH neutralizer. Most important our WH-RO RO systems are wet tested before shipping, user friendly, and components are shipped pre - plumbed on the skid and in most cases unit only requires a 120 volt 1 phase 60 Hz power 20amp service.

WH - RO Packaged Skid Mount Reverse Osmosis is plumbed and prewired in most cases with one water inlet connection, one drain connection, one water use connection, and two or three electrical connections to allow for fast hassle free installation. From the delivery of the equipment to your home or facility to the set up and use of water - In hours not days!  

Ordering your new whole house reverse osmosis filter has never been easier. We offer complete pricing and detailed information on our whole house reverse osmosis filters throughout our website. If you have a specific question before ordering please call toll free or e - mail our staff for a fast informative response. 

Customer Assurance – We are a reliable name in the water treatment industry. We take great measures to assure our customers the best quality, dependability, service, and reliability. We offer the following:

  • Secure online ordering or call toll free
  • Free shipping - export available at additional cost.
  • Unlike, most multi-piece reverse osmosis water treatment systems that are scattered throughout your home and well house our skid mount reverse osmosis unit contains all pre/post treatment if required, reverse osmosis, pumps, recirculating ozone on a base frame And most important it is user friendly and easy to install .
  • Our WH-RO 500, 1000, and 1800 Series can be customized for sea or brackish water (desalination) applications. Please call or e - mail for special pricing.


If our larger WH-RO Series whole house reverse osmosis filters are out of your budget.

We offer our alternative compact series reverse osmosis systems as below.



  Small Compact Residential / Commercial Reverse Osmosis  System150 to 1,000 GPD  


Appearance Will vary 

Compact Reverse Osmosis Systems - Water Filters for Salt, Sodium, and TDS - Total Dissolved Solids

Salt Removal Systems Available in 150gpd, 350gpd, 500gpd and 750gpd  

Perfect Choice - compact wall mount reverse osmosis filter solutions for coffee shops, cafe's, restaurants, spot-free rinse, labs, small business, and whole house water filtration.  

Ordering your new reverse osmosis water filter has never been easier. We offer complete pricing and detailed information on our water filters throughout our website. If you have a specific question before ordering please call toll free or e-mail our staff for a fast informative response.

Our Reverse Osmosis Systems Are Build to Last - Standard Features

  • Aluminum Frame
  • Includes: Stainless Steel Element Vessels
  • Includes: Dual Level Float Switches For Atmospheric Tank
  • Includes: Contactor For Represssure System
  • Includes: On / Off Switch
  • Includes: Thin Film Composite Membrane delivering recovery of 30% - 70% to drain
  • Includes: Liquid Filled High Pressure Gauge
  • Includes: 5 Micron Pre Filter
  • Includes: Carbon Block Pre/post Filter if required
  • Includes: Prefilter Gauges
  • Includes: Drain & Recirculation Adjustment Valves
  • Includes: Drain and Permeate Flow Meters
  • Approximate Dimensions: 24" w  x 15"d x 30"h to 50" h (150gpd-1,000gpd)
  • Operating Parameters: Max TDS-2000ppm, Total iron is less than 0.3ppm, Manganese is less than 0.05ppm, Water hardness below 5 gpg.
  • OVERSEAS SHIPPING AVAILABLE – crating in addition


We pride ourselves on our workmanship and our attention to detail. To ensure our customers that our systems will perform to their utmost potential WE STRONGLY RECOMMEND FAXING AN EXISTING WATER ANALYSIS OR HAVING YOUR WATER TESTED TO DETERMINE WHICH IS THE BEST SYSTEM FOR YOUR WATER CHEMISTRY. Once that recommendation is made, you can have complete faith that your system will work at its peak potential over a long period of time. You can choose to buy a reverse osmosis system "off the rack" and take your chances or you can let us tailor make a system based upon your specific needs. This is what sets the WaterGuard reverse osmosis systems apart from all the rest.